flushCompactionQueue() fires session.prompt(text) on the first non-slash
queued message. If the session is still streaming when compaction-end
lands (race between isStreaming flipping false and the event arriving),
prompt() throws AgentBusyError, restoreQueue() dumps the message back
into compactionQueuedMessages, and it stalls there: nothing drains that
array except the next compaction-end. The user sees the steer preview
but cannot deliver the message (Alt+Up consults session.clearQueue, not
compactionQueuedMessages).
Pass streamingBehavior derived from the queued message's mode so
prompt() routes into the steer/follow-up queue when busy and runs as a
fresh prompt when idle.
Fixes#825
buildSessionContext walked the entry path and unconditionally overwrote
models.default from every assistant message's reported model. Temporary
fallbacks (retry fallback, context promotion) and codex-side model
downgrades both produce assistant messages tagged with a different model
id, which clobbered the user's explicit /model pick on resume and made
the session silently revert to the older model.
Treat assistant-message inference as a legacy fallback that only fills
in models.default when no explicit `model_change` with role="default"
has been seen on the path.
Fixes#849
Phase1 caught every per-claim failure, recorded the reason in
jobs.last_error, and surfaced only an aggregate failed count via the
phase1 completion debug line. Users hitting setup-time failures (e.g.
WSL2 stale rollout paths producing ENOENT before any LLM call) had no
diagnostic. Emit logger.error per failed claim with threadId,
rolloutPath, and reason so the actual error is visible in omp.log.
Fixes#846
Add optional defaultLevel to ThinkingConfig schema/type so models.yml can
declare a preferred starting thinking level per model. On model switch
the agent session adopts model.thinking.defaultLevel when present (with
explicit caller-supplied level still winning); otherwise current behavior
is preserved. SDK initial selection prefers the model's defaultLevel
before falling back to the global defaultThinkingLevel setting.
Fixes#775
When entering plan mode while the session is streaming, #applyPlanModeModel
defers the switch into #pendingModelSwitch and snapshots the previous model.
On exit, the snapshot was restored but the deferred switch was left queued,
so the next agent_end flush landed the session on the plan-role model after
the user had already left plan mode.
Drop the pending switch in #exitPlanMode when its target matches the
plan-role resolution; leave any other queued switch alone.
Fixes#816
Claude marketplace plugins (e.g. context7@claude-plugins-official) ship
.mcp.json with the server map at the top level rather than under the
mcpServers key. The loader only accepted the nested shape, so install
appeared to succeed but no MCP tools were registered. Detect both shapes
and validate that each entry declares command (stdio) or url (HTTP/SSE)
before registering.
Fixes#851
The autoContinue post-compaction prompt echoed the summary's '## Next
Steps' heading, but that section is generated only from the compacted
tail; the kept ~20k recent tokens are not fed to the summarizer. When
the user pivoted within the kept window, 'Continue if you have next
steps.' anchored the model on the now-outdated plan instead of the
latest intent.
Move the prompt to prompts/system/auto-continue.md (per AGENTS.md
no-inline-prompts rule) and rewrite it to direct the model to re-read
the kept recent messages and follow the user's most recent request,
explicitly allowing it to stop when nothing remains.
Fixes#840
isPathInDirectory only normalized strings via path.resolve, so on Windows
when Bun is installed via Scoop (~/.bun is a junction to scoop\persist\
Oven-sh.Bun\.bun) the omp path from $which and the bunBinDir from
'bun pm bin -g' compared as different directories, causing 'omp update'
to take the binary-swap path instead of 'bun install -g' and fail with
EPERM unlinking omp.exe.bak (Bun has the running exe open). Layer
fs.realpathSync.native on top of the existing lexical guard, resolving
the file's parent dir so non-existent target paths still fall through.
Fixes#845
- Added a shared session path resolver that maps local:// URLs through local-protocol options, skips other internal schemes, and returns an absolute filesystem path for real files.
- Updated streaming-edit pre-cache and post-edit cache invalidation to use the shared resolver, preventing internal-scheme assertions while keeping filesystem-based flow for local plan files.
- Extended streaming-edit tests to confirm local:// plan edits complete without panicking and that auto-generated checks receive resolved absolute paths.
- Added support for batch PR operations by accepting `pr` as string or array and dropping `worktree` input.
- Updated `pr_view` and `pr_diff` to normalize PR IDs, process multiple PRs in parallel, and emit combined summaries.
- Refactored checkout into `checkoutPullRequest`, added repo-locking, fixed worktree paths, and summary metadata outputs.
- Updated `remote.add` handling with URL-aware idempotency and per-repo queueing for serialized git mutations.
- Added temp-home test scaffolding and expanded tests for batched PR flows and remote add conflict/no-op cases.
The task description prompt was compressed in c6cab807d — the explicit 'Current input mode' and 'Every assignment must stand on its own.' phrasings are gone. Replace those literal-string assertions with checks against the rendered mode-dependent content that actually differentiates the modes ('context` or `assignment`' for schema-free, 'each `assignment`' for independent). Mode-driven schema differences remain covered by the surrounding parameter-bullet assertions.
- Removed example and verbose description metadata from many debug tool schema properties while preserving field types and names.
- Simplified Enum declarations for `action` and `access_type` by using direct enum lists.
- Normalized several numeric and string field definitions in the schema without changing parameter names.
- Added a PROMPT_TASK_LIMIT constant set to 20 in the recipe runner model.
- Updated buildPromptModel to include only the first 20 tasks from each runner when generating prompt tasks.
- Added an optional hiddenTaskCount field to PromptRunnerModel to represent truncated tasks.
- Added a `/context` slash command flow from registry to interactive-mode command dispatch.
- Added `handleContextCommand()` to the mode context interface and command-controller wiring.
- Added context usage breakdown utilities, cell allocation, and 20x10 usage rendering for token categories.
- Reworked compaction token estimation to use tokenizer counts, role aggregation, image token estimates, and fallback handling.
- Exported `resolveThresholdTokens()` as a public compaction helper.
- Allowed bare `LidA..LidB` to recover a missing-range-delete typo and accepted `|` as a legacy range replacement separator while validating ranges and replacement text.
- Enabled indented hashline statements to parse as replacement edits and added a preflight pass that validates all atom sections before any file write occurs.
- Updated hash-mismatch messaging, prompt wording, and tests to reflect hash-only rebase candidates and the new range/section behaviors.
- Updated the Atom grammar to parse replacement blocks via a set block rule that no longer targets range replacements only.
- Extended continuation preprocessing to allow backslash lines after single-line replace operations (including legacy `@` and `|` forms) while preserving the active-replacement check.
- Added tests and prompt documentation for single-line continuation cases and for rejection of backslash-like text outside an active replacement.
- Added `with_text` to keep minimized output byte counters consistent when replacing output text.
- Wrapped successful pipeline and overlay minimizer results with a post-step that emits `OK\n` when the transform empties output on success.
- Added tests to confirm successful empty-output minimization becomes `OK\n` and failures keep empty output.
- Added atom edit support for Lid ranges, before-anchor inserts, and no-op Lid=TEXT success handling.
- Expanded hashline recovery to scan shifted hashes, match unique alternates, and emit ±5 anchor-shift hints.
- Added edit failure categorization with per-category counts, percentages, and detailed report lines.
- Added regression coverage for shifted-hash recovery, range continuation, cursor shorthand, and split-file atom ops.
- Resolved recipe operations now return a command plus optional working directory, and the shell tool path forwards both values when executing.
- Updated the package runner to assign task-local `cwd` entries for workspace scripts instead of embedding workspace command prefixes.
- Adjusted renderer wiring and tests to use the new `cwdFromOp` helper and assert task object shapes with preserved `cwd` values.
- Parsed symbol occurrences inline via a new `name#N` symbol spec and defaulted missing occurrences to 1.
- Updated LSP symbol column resolution to derive occurrence from the symbol spec, removing the separate occurrence argument.
- Synchronized prompts, tool schema rendering, and regression tests to document and verify `#N` occurrence selection instead of a standalone occurrence field.
- Updated the tool configuration key and labels from runCommand to recipe, including its settings UI schema.
- Renamed the run_command tool implementation, prompts, and test wiring to recipe and updated tool registry and renderer registrations.
- Adjusted auto-included tool behavior and availability checks to use the recipe name and recipe.enabled setting.
- Updated loop command handling to toggle `/loop` without a prompt argument and prompt for the next user input to start repeating.
- Stored each user-submitted prompt as the active loop prompt while loop mode is enabled so iterations auto-resubmit that input after each yield.
- Introduced `pauseLoop` behavior to clear the captured loop prompt and cancel pending auto-submit when Escape is pressed, while `handleLoopCommand` now no longer disables mode automatically with arguments.
- Updated `formatSessionDumpText` to skip `thinking` entries with empty or whitespace-only content.
- Prevented empty `<thinking>` sections from being emitted in session dump output.
- Reversed atom mode parsing of cursor anchors so "^" now resolved to BOF and "$" to EOF.
- Updated the atom command documentation and examples to reflect the corrected BOF/EOF markers.
- Adjusted parser tests to expect prepend via "^" and append via "$" with corresponding cursor kinds.
- Root package tasks were set to use `namespaced: false` when collected.
- Updated the workspace test to expect `root` instead of `root-app/root` in the tool description.
- Added an assertion that executing `op: "root"` returns root output text directly.
- Tracked locally submitted user signatures for both optimistic and streamed-queue submissions in interactive-mode context state.
- Updated user message_start handling to avoid re-clearing the editor and re-adding chat for locally originated messages.
- Cleared consumed local signatures on queued-message restore and added tests for queued, external, and optimistic message_start editor behavior.
- Renamed legacy `just` tool/config wiring to `run_command` and `runCommand.enabled`, replacing the old `just` prompt.
- Added `RunCommandTool` plus prompt and renderer registration so clients use the new `run_command` API.
- Implemented `op`-based runner/task resolution with new runner metadata for Just, Package, Cargo, Make, and Task with error handling.
- Refactored Bash shell rendering helpers and added run-command tests for detection and execution routing behavior.
- Added an `isOAuth` model flag and passed it through Anthropic stream calls to force OAuth-shaped request options.
- Extended model-registry config handling with an `auth: oauth` mode and default `isOAuth` resolution for `anthropic-messages` providers while allowing explicit `apiKey` auth to remain unset.
- Added tests covering OAuth defaults and opt-outs for Anthropic and non-Anthropic custom providers.
- Added a new `just` tool that validates availability of a `just` binary, loads a local justfile, and executes user-specified recipes.
- Registered and exposed `JustTool` through exports, the builtin tool map, and availability checks controlled by `just.enabled` setting.
- Updated tool selection to auto-include `just` when `bash` is requested and tool settings allow it.
- Added a new `loop.mode` enum setting and UI option entries for prompt, compact, and reset behaviors.
- Updated interactive mode's loop auto-submit flow to execute selected compact or reset actions before re-submitting the prompt.
- Registered a new `just.enabled` setting in the tools settings schema.
- Atom edit application stopped throwing when a `-Lid|OLD` delete anchor's OLD payload mismatched the current line.
- Delete hunks now ignore the OLD payload and rely on Lid hash anchoring for validation and rebasing.
- Atom edge-case tests were updated to verify mismatched OLD payloads are now accepted when hashes still match.
- Added loop-mode command handling in interactive mode, including enable/disable toggling, repeated auto-submission scheduling, and Escape-based cancellation.
- Propagated loop mode state to the status line via a renamed `mode` segment that now renders plan or loop status, and updated presets/theme assets for the new loop icon.
- Migrated persisted status-line segment usage from `plan_mode` to `mode` in configuration defaults and normalization so legacy settings continue to load.
- Removed the guard that rejected edits when multiple mutating anchors were auto-rebased in atom anchor validation.
- Updated atom hash-mismatch tests to show multiple set and delete anchors can rebase together and still return warning messages.
can1357