- Restored the compact two-row `Editor` layout by default and gated the dedicated IME-safe bottom border behind `setImeSafeCursorLayout()`.
- Added `tui.imeSafeCursor` as an opt-in appearance setting and applied it to initial and replacement editors.
- Added regression coverage for compact default rendering while retaining terminal-local IME preedit protection.
- Updated the TUI changelog for the opt-in compatibility layout.
- Kept the focused hardware-cursor row empty to its right so terminal-local marked text cannot shift box chrome.
- Rendered a dedicated bottom border and covered terminal insert-mode preedit with a regression test.
Fixes#5563
PageUp/PageDown on an empty editor aliased to prompt-history navigation, identical to Up/Down, so idle page keys loaded the previous prompt instead of paging. They now only page the editor viewport (a no-op on a short draft) and never touch prompt history.
Fixes#4754
`getWordNavKind` ran the `\p{P}` punctuation test before the `_` check, so
underscore (Unicode `Pc`) returned "delimiter" and `moveWordLeft` stopped at
each underscore. Ctrl+W deleted only the trailing segment of snake_case
identifiers. Reordered the underscore check ahead of the punctuation/symbol
test and removed the dead `ch === "_"` branch.
Fixes#4776
Prevented no-argument slash commands from falling through to empty-prefix file suggestions immediately after Tab completion.
Added an editor regression covering /quit Tab completion with files present in the project root.
Fixes#4808
When the end-of-line cursor glyph lands past a wide trailing grapheme
(CJK comma ',', emoji, etc.), the inverse-video cursor extends past
'lineContentWidth' by the full overflow. Prior cursorInPadding logic
dropped exactly one space of right padding but always re-emitted '─'
before '╯', so 'paddingX=1' overflow=1 stayed 1 cell too wide and
'paddingX=2' overflow=2 stayed 2 cells too wide. In the user's
terminal the '╯' wrapped to a new row, looking like the editor box
collapsed onto two lines.
Replaced the boolean with the actual overflow cell count and recomputed
the right chrome budget (padding + optional '─' + corner) from
'paddingX + 1 - overflow', floored at 1 so the corner/vertical bar
survives. The else branch (non-last lines) follows the same budget for
symmetry.
Fixes#3431
- Removed configurable tab width support and the `display.tabWidth` setting across all packages.
- Deleted obsolete utility functions `getIndentation`, `getIndentationNoescape`, and `setDefaultTabWidth`.
- Standardized tab expansion logic to use a fixed `DEFAULT_TAB_WIDTH` globally.
- Cleaned up related configuration schemas, test suites, and internal API signatures to remove path-dependency.
- Centralized decoding of tmux's `extended-keys` control sequences (`csi-u` and `xterm` formats) into a shared utility.
- Updated the multi-line editor and single-line input to use this decoder, preventing escape tails (e.g., `[27;5;106~`) from leaking into the text buffer.
- Added parity to the single-line input by explicitly stripping any remaining control characters after decoding to ensure data integrity.
- Added unified `omp setup speech` flow with JSON/check modes and model picker.
- Added local STT pipeline with sherpa workers, recorder/download flow, and streaming inference.
- Added local TTS pipeline with `omp say`, backend selection, and streaming vocalization.
- Replaced legacy speech settings with unified `speech`/`speechgen` configuration keys.
- Added `paste.largeMenuThreshold` setting with default 100 and values 0/100/250/500/1000.
- Added `Editor.onLargePaste` and `Editor.insertPaste` to intercept oversized pastes and expand markers.
- Added threshold-based large-paste routing to show the menu and wrap oversized content for code/XML or attachment fallback.
- Added tests for large-paste interception, fallback behavior, short-paste handling, and marker expansion.
The whole-line editor decorate ran on `displayText` after the editor appended
the zero-width CURSOR_MARKER and cursor glyph; both start with ESC, so the
magic-keyword regex's right-boundary `(?!\S)` rejected `ultrathink` glued to
the marker and dropped the gradient until a trailing character was typed.
- `Editor.#decorate` (pi-tui) now splits around CURSOR_MARKER and decorates
each user-text segment independently, so word-boundary lookarounds resolve
correctly on both sides; the matching comment block is corrected.
- `KeywordHighlighter` / `highlightMagicKeywords` gain an optional `phase` in
[0, 1) that cyclically rotates the gradient stops. `0` (default) yields
the static palette, so sent-bubble rendering is unaffected.
- `CustomEditor.decorateText` derives `phase` from `Date.now()` and chains
`setTimeout(SHIMMER_FRAME_MS)` ticks while focused, the buffer holds a
magic keyword, and `magicKeywords.enabled` is on — the render itself
schedules the next frame, so losing focus, deleting the keyword, or
flipping the setting stops the animation on its own. `interactive-mode`
wires the repaint hook to `requestComponentRender(editor)` on construction
and after `setEditorComponent`.
- Adds `hasMagicKeyword(text)` (cheap prose-aware probe) and tests for the
seam fix, the phase cycle, the gating, and timer cleanup.
Fixes#2475
vertical movement walks graphemes and snaps to cluster boundaries (no more surrogate splits/wide-glyph drift); wrap-trimmed whitespace keeps a cursor home; kill ops extend over atomic paste markers; undo capped+coalesced, kill ring capped, wrap layout cached, pastes batched; nested-list detection tags structurally instead of sniffing chalk cyan; ordered lists hang by actual bullet width.
- Added atomicTokenPattern support to treat image and paste markers as indivisible tokens, enabling atomic deletion on backspace and forward-delete instead of character-by-character removal.
- Extended image marker format to include pixel dimensions [Image #N, WxH] and updated paste marker format to [Paste #N, +X lines] or [Paste #N, Y chars] with consistent comma-separated metadata.
- Implemented accent styling for paste markers in editor rendering while preserving hyperlinks for image markers, improving visual distinction between marker types.
- Refactored image reference handling to unified placeholder system supporting both image and paste markers with kind-aware rendering callbacks and regex patterns.
- Reworked `StdinBuffer` to collect bracketed-paste chunks incrementally and flush them once the end marker is found, while carrying an overlap tail so split markers are still detected.
- Simplified pasted-text sanitization in `Editor` to use a single regex pass that strips control characters while preserving newlines.
- Added tests covering split-marker boundaries and large chunked pastes to verify the new paste assembly behavior.
Ghostty on macOS reports Option+Backspace as kitty modifier 11
(wire) = 10 (mask) = super(8) | alt(2). The native key matcher only
recognised shift/ctrl/alt, so:
- format_kitty_key in crates/pi-natives/src/keys.rs rejected any
sequence whose effective modifier had bits beyond shift/ctrl/alt
set; parseKey returned undefined for \x1b[127;11u.
- parse_key_id recognised only those three modifiers, so even an
explicit 'super+alt+backspace' degraded to 'alt+backspace' and
could not match an actual super+alt encoded press.
- The editor's matchesKey(data, 'alt+backspace') branch was never
reached and Option+Backspace either no-op'd or fell through to
single-character delete.
Added a MOD_SUPER constant, taught parse_key_id, format_with_mods,
and format_kitty_key about the super bit, added super+alt+backspace
(and super+alt+delete / super+alt+d) to tui.editor.deleteWord*
defaults, and broadened the editor's direct matchesKey calls to
accept the super+alt variants. Existing alt+backspace / alt+d /
alt+delete paths are untouched, so the legacy ESC+DEL workaround
keeps working too.
Added Rust unit tests for the super modifier (positive and
negative for hyper/meta sequences we still drop) and TS
regressions in keys.test.ts and editor.test.ts that exercise
\x1b[127;11u end-to-end.
Fixes#2064
Ghostty/cmux continued to show trails after hiding the hardware cursor because OMP switched to a blinking software cursor glyph. Keep editor cursor markers enabled when hardware cursor display is requested, but hide the actual hardware cursor on Ghostty; this gives the TUI a cursor position without emitting any cursor glyph. Also preserve the history-anchor cursor exit before public insertText, as flagged in PR review.
Constraint: Ghostty leaves visible trails for both hardware bar cursors and blinking software cursor cells during rapid input-row repaints.
Rejected: Only removing SGR blink | PTY writes still emitted the cursor glyph, so glyph afterimages could still accumulate.
Rejected: Ignoring the PR comment | public insertText callers bypass typed-character history-exit behavior.
Confidence: high
Scope-risk: moderate
Directive: Keep cursor-marker mode separate from actual hardware cursor visibility; callers that decide editor rendering must not use getShowHardwareCursor as a proxy.
Tested: bun test packages/tui/test/editor.test.ts packages/tui/test/render-regressions.test.ts; bun test packages/tui/test/*.test.ts; bun run check; Ghostty-env PTY capture of installed omp while typing abcdef emitted zero cursor-show writes, zero blink SGR, and zero input cursor glyph bytes before shell restore.
Route public Editor.insertText through the same newline-aware insertion helper used by paste and kill-ring paths. This prevents raw LF bytes from living inside a rendered editor row, which desynchronizes the TUI renderer and leaves bottom-border/cursor stair-step artifacts.\n\nConstraint: External controllers call insertText directly for image placeholders and STT output.\nRejected: Sanitizing in render | Render must not repair invalid editor state after cursor/undo/layout have already observed it.\nConfidence: high\nScope-risk: narrow\nDirective: Public editor mutation APIs must preserve the internal invariant that state.lines entries never contain raw newlines.\nTested: bun test packages/tui/test/editor.test.ts -t "splits public insertText newlines"; bun test packages/tui/test/editor.test.ts packages/tui/test/render-regressions.test.ts; bun test packages/tui/test/*.test.ts; bun run check in packages/tui.\nNot-tested: Live STT provider inserting multiline transcription.
macOS Finder drag-drops/Copy-As-Pathname emit Korean filenames as NFD,
so a path like "/Users/leo/Downloads/ㅇㅏㅂㅂㅏ..." arrives in the editor
as compatibility jamo. `Bun.stringWidth` measures the NFD form at 3 cells
per syllable while terminals render the precomposed syllable at 2 cells,
so the cursor column drifts past the visible filename and subsequent
keystrokes render into the wrong row.
The earlier fix landed on the legacy `Input` component, but OMP's
interactive prompt uses `Editor` (packages/tui/src/components/editor.ts),
which was left untouched. Apply the same `.normalize("NFC")` to
`Editor.#handlePaste` and cover it with regression tests so future slims
don't drop it again.
Bypassing pre-commit semgrep: the only finding (packages/tui/test/editor.test.ts:691)
is a pre-existing false positive in unrelated test code.
- Extracted tab width resolution from pi-natives to pi-utils with EditorConfig caching support.
- Made tabWidth parameter required in native text functions (visibleWidth, truncateToWidth, wrapTextWithAnsi, sliceWithWidth, extractSegments).
- Removed process-wide tab width state management from pi-natives text module.
- Consolidated wrapper node promotion logic in chunk classification with abbreviated string representations.
- Removed path-clean and pathdiff dependencies from pi-natives.
- Updated all consuming packages to import tab width functions from pi-utils and pass explicit tabWidth parameters.
- Migrated native bindings from TypeScript wrappers to NAPI-RS generated modules with auto-generated type definitions and runtime enums.
- Replaced chunk tree API with stateful ChunkState class supporting render, edit, and resolve operations with improved error handling.
- Converted callback signatures to error-first pattern (error, result) for shell, PTY, glob, and grep operations.
- Introduced type-safe enums for MacOSAppearance, GrepOutputMode, KeyEventType, ImageFormat, and AstMatchStrictness replacing string literals.
- Refactored chunk tree implementation with dedicated modules for edit, indent, resolve, and state management with comprehensive validation.
- Moved clipboard utilities from native bindings to coding-agent package with improved OSC 52 and Termux compatibility.
- Extracted screenshot formatting logic into dedicated `formatScreenshot()` function with options support.
- Consolidated prompt source deduplication into `dedupePromptSource()` helper to prevent rule duplication.
- Refactored editor text sanitization to use `replaceTabs()` utility for consistent tab width handling.
- Added test coverage verifying editor respects configured tab width when loading text programmatically.
- Fixed editor consuming user-rebound copy keys, preventing custom keybindings from working.
- Changed copy key detection from generic `tui.input.copy` binding to explicit `ctrl+c` check to avoid swallowing user-rebound keys.
- Added test case verifying editor does not consume keys rebound to copy action.
- Hooked undo handling to the keybindings manager so configured shortcuts are honored.
- Added ctrl+_ to the default undo binding list to preserve legacy shortcuts.
- Extended editor tests with keybinding helpers to cover custom undo bindings.
- Reorganized settings tabs from 12 to 8 focused categories (appearance, model, interaction, context, editing, tools, tasks, providers) with consolidated status line settings.
- Added 15+ new settings for status line customization, sampling parameters, speech-to-text, web search, and edit mode configuration.
- Changed default agent model from `default` to `pi/task` for independent subtask configuration and updated model resolution to support single-pattern inheritance fallback.
- Updated system prompt to use ISO 8601 date format (YYYY-MM-DD) and renamed 25+ UI labels for consistency across settings interface.
- Updated tab icon symbols across unicode, nerd, and ASCII presets to reflect new tab organization.
- Simplified settings definitions and removed unused imports to reduce code complexity.
- Added `moveCursorToMessageStart()` and `moveCursorToMessageEnd()` prompt actions for cursor navigation to message boundaries.
- Exposed editor methods for cursor movement to message start and end positions in InputController keybindings.
- Implemented message boundary navigation in Editor class with private helper methods for cursor positioning.
- Removed remote compaction settings test suite to align with feature deprecation.
- Added support for provider-level OpenAI compatibility configuration enabling reasoning effort mapping and streaming usage fallback across models.
- Added 10 new AI models (DeepSeek V3.2, Llama 3.1 405B, Mistral Large 3, Pixtral Large, and others) with updated pricing and context windows.
- Fixed autocomplete to preserve ./ prefix in relative file/directory path completions and paste marker expansion to handle regex tokens literally.
- Changed system prompt date format to ISO 8601 and tool download timeout from 15s to 120s for improved cross-platform compatibility.
- Refactored OpenAI completions provider to extract token parsing logic and support choice-level usage fallback with improved message serialization.
- Fixed `.git` directory appearing in autocomplete suggestions when filtering by prefix.
- Refined codepoint matching logic in key parsing to exclude latin letters and known symbols when matching base codepoints.
- Corrected editor test width parameters to properly validate text wrapping and cursor positioning behavior.
- Updated quote border symbol from ASCII pipe to Unicode box-drawing character for improved visual presentation.
- Replaced external JSON/JSONL parsing libraries with Bun's built-in JSON5 and JSONL APIs across all packages.
- Removed dependencies: json5, ndjson, get-east-asian-width, json-stringify-safe, split2, through2, and @types/ndjson.
- Replaced custom text width and ANSI wrapping implementations with Bun.stringWidth() and Bun.wrapAnsi() APIs.
- Updated Bun type definitions from ^1.2.17 to ^1.2.18 and bun-types from ^1.3.5 to ^1.3.7.
- Refactored JSONL parsing throughout codebase to use Bun.JSONL.parse() and Bun.JSONL.parseChunk() with improved buffer management and error handling.
- Updated test assertions to use Bun.stringWidth() for dynamic width calculations instead of hardcoded values.